2 CORE SUBMERSIBLE PVC FLAT CABLE


2 CORE SUBMERSIBLE PVC FLAT CABLE

APPLICABLE STANDARD : IS 694:2010
CONDUCTOR : THE CONDUCTORS ARE DRAW FROM 99.97 % BRIGHT ELECTROLYTIC GRADE COPPER WTH MORE THAN 100 % CONDUCTIVITY ARE ANNEALED AND BUNCHED TOGETHER (CLASS-2 & 5)
INSULATION PVC : THE BUNCH CONDUCTORS ARE INSULATED WITH SPECIALLY FORMULATED PVC COMPOUND WITH A HIGH INSULATION RESISTANCE VALUE.
THE INSULATION PROCESS IS CARRIED OUT ON MODERN HIGH SPEED EXTRUSION LINES, WHICH ENSURES HIGH ACCURACYAND CONSISTENCY IN PERFORMANCE
SHEATH PVC : THE OUTER SHEATH OF THE CABLE IS MADE FROM A SPECIAL GRADE OF ABRASION RESISTANT PVC COMPOUND IMPERVIOUS TO WATER, GREASE, OIL ETC.
OPERATING TEMPERATURE RANGE: : TEMP -15°C TOMAX, +70°C/ +85°C
COLOUR : BLACK, GRAY (AND ALSO OTHER COLOUR REQUEST ON CUSTOMER)
PACKING : 100m. , 500m & 1000m. (+/-5%) HIGHER LENGTH AVAILABLE ON REQUEST.
MARKING : THE CABLES ARE PRINTED WITH GENERIC MARKING "JOHNSON CABLES 2 CORE FLAT CABLES"
APPLICATION : THIS TYPE OF CABLES OF SUITABLE FOR WIRING IN RESIDENTIAL AND COMMERCIAL INFRASTRUCTURE PROJECT
FEATURE : - MANUFACTURED FROM BRIGHT ANNEALED 99.97 % PURE COPPER CONDUCTORS AND HENCE, OFFER LOW CONDUCTOR RESISTANCE.
: - OUTER SHEATH CONSISTS OF HIGHLY ABRASION RESISTANT PVC COMPOUND IMPERVIOUS TO GREASE, OIL AND WATER ETC
: - EXCELLENT MECHANICAL AND ELECTRICAL PROPERTIES.
: - PROGRESSIVE SEQUENTIALLENGTH MARKING ON EVERY METER.
ISO CERTIFICATION : ISO 9001:2015, ISO45001:2018, ISO 14001: 2015, CE, RoHS
PRODUCT CERTIFICATION : IS 694:2010 7098 P-1 TUV RHEINLAND CERTIFICATE No. R 60160877
NOMINAL CROSS SECTIONAL AREA OF CONDUCTOR NUMBER/ NOMINAL DIA OF WIRES (MAX.) NOMINAL THICKNESS OF INSULATION NOMINAL THICKNESS OF SHEATH OVERALL DIMENSION (W X H) MAXIMUM DC RESISTANCE OF CONDUCTOR AT 20° C MAX. CURRENT CARRYING CAPACITY
mm2 Nos./mm mm mm WIDTH (mm) HEIGHT (mm) Ω/km Amps
2C X 1* 14/0.3 O.6 O.9 7.80 4.90 18.1 12
2C X 1.5* 22/0.3 0.6 O.9 8.40 5.20 12.1 14
2C X 2.5* 36/0.3 0.7 1.0 9.70 6.00 7.41 18
2C X 4.0 56/0.3 0.8 1.0 11.30 7.00 4.95 26
2C X 6.0 84/0.3 0.8 1.1 13.30 8.00 3.30 31
2C X 10.0 140/0.3 1.0 1.4 16.00 9.60 1.91 42
  • 1. THE NUMBER OF WIRES AND DIAMETER MENTIONED IN THE TABLE ARE APPROXIMATE AND NOMINAL, HOVWEVER THEY SHALL MEET THE REQUIREMENTS CONDUCTOR RESISTANCE AS PERSTANDARDs.IS8130
  • 2. TOLERANCE: UP TO 4.0 SQ MM +/-0.5 MM. 6.0 sQ MM& 10 SQMM +/-1.0 MM
  • 3. THE ABOVE DATA IS INDICATIVE AND MAY BE REVISED WITHOUT PRIOR INFORMATION. JOHNSON CABLES WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF INCORRECTAPPLICATION.